Serial no: 512925 125371
Objectives
PL 2.5/0.08 160/-
EF 10/0.25 160/-
EF 40/0.65 160/0.17
EF 100/1.25 160/0.17 OEL
Eyepiece: GF-P 10x/18
Lamp 6v 20W Halogen Osram 64250.
Quantity: 2
field portable with hard case
barrel focus
Magnification: 6 to 50
Eyepiece: 10x/21
Separate light source
Serial no: 0372258
Objectives
3.2/0.10 160/-
EF 10/0.25 160/-
EF 40/0.65 160/0.17
EF 100/1.25 EL 160/0.17
Eyepiece: 10x/18
Lamp 6v 20W Halogen Osram 64250
Magnification 6.4 to 40 x
Eyepiece: 10x/21B
External lamp (with transformer) attached: Osram 64410
Serial no: 10346910
Magnification 0.63 to 4.0 x
Eyepiece: 10x/21B
Light source Leica CLS 150, Lamp 15V 150W Osram 64634
Magnification 3 to 15.5 x
Eyepiece: 10x/21B
Lamps
Upper: 2 units 50cm warm with light tubes, Osram 25 Concentra R50
Light table (lower): 2 units of 6V 20W Osram 64250
for grounding soft to medium-hard substances
comes with
Hinged removable cover
Cassette with inserted ring sieve
Quick-release closure for cover
Safety interlock for cover
Proximity switch (safety check)
Funnel with splashback protection
Plate for operation without cassette cover
Push-fit rotor
Ring sieve
Collecting pan
Design voltage: VAC 230±10% or VAC 115±10%
Design frequency: Hz 50/60
Power consumption: W 14
Power output: W 4
Speed range: rpm ca. 100 to 1100 infinitely variable
Max. stirring quantity (Water) ltr 3
Perm. ambient temperature: °C +5 to +40
Perm. relative humidity: % 80
Dimensions: mm 140 x 200 x 75
Weight: kg 1,4
Ranges E455: 0 ... 500 V / 0 ... 500 mA / 0 ... 150 W
Timer 1 ... 999 min. / 0.1 ... 99.9 h
Outputs dual in parallel, floating
Leakage detection > 500 μA
No load detection < 0.1 W
Minimum load
resistance E455: > 15 Ω
E431: > 5 Ω
Ambient temp. 4 ... 40°C
Rel. humidity 0 ... 90 % (non-condensing!)
Power supply 210-250 V~, 50/60 Hz
Cabinet rugged plastic/metal cabinet
Dimensions 300 x 120 x 180 mm
Weight 5 kg
Quantity: 4
Analytical grinder
Suitable for carrying out low-loss grinding of hard and brittle substances as of grain size 6-7 mm
Technical specifications: 220 V, 50 Hz, 0,9 A, 200 W
Maximum number of revolutions: 20.000 rpm
Short-time operation: 5 min
Capacity grinding chamber: 50 ml
Housing(D)x(H)x(W): 10 x 21 x 10 cm
Dimensions grinding chamber (ø)x(H): 6 x 3 cm
These shaker units feature flat, space-saving profiles. Ideal for slow shaking operations.
• Maximum shaking weight (with attachment) 7.5kg
• 0-56 min. timer
• Speed range: 0-500 rpm (Model KS 250)
Quantity: 2
stirrer drive: split-pole motor, electronic speed control, overheat protection
speed range: 0 – 2200 rpm
speed control: scale marks
supply voltage: 230 volts / 50 Hz; 115 volts / 60 Hz (optional)
protective class: II (protective insulation)
power dissipation: 7 watts
weight: 1.2 kg
dimensions (w x d x h): 120 mm x 140 mm x 80 mm
ambient specifications: 0 – 50 °C at 80 % rel. humidity
chemical resistance housing: polyamide; top plate PVDF
This is the ice condenser section of a freeze drying system
suitable for freeze drying biological preparations in a lab
only requires the attachment of a suitable vacuum pump and drying accessory to form a complete freeze drying system
is also suitable for use on other vacuum duties, including evaporation and distillation processes
has a condenser chamber, a refrigeration system and a control system which includes temperature and pressure indication and user controls
the refrigerant used in the LyoDry Compact is CFC free
All of the LyoDry Compact components are all housed in a stainless steel cabinet which is designed for bench-top use
When used with suitable accessories, it can be used to freeze dry materials in bulk trays, round-bottomed flasks, vials or ampoules
Alternatively, it can be used as a low-temperature vapour trap (or cold trap) that may be attached to an existing evaporation facility
Sample Volume: 10 μL nominal (Larger samples or samples as small as 2 μL can be measured reliably with special procedures)
Measurement Range: Typically 0 to 3200 mmol/kg* @ 25 °C ambient
Measurement Time: 80 seconds
Resolution: 1 mmol/kg
Repeatability Standard deviation: ≤ 2 mmol/kg
Linearity: 2% of reading from 100 to 2000 mmol/kg
Readout: 10 X 6.8 cm LCD
Operating Temperature: 15° to 35 °C ambient Maximum relative humidity 80%(instrument should be at stable temperature before calibrating)
Calibration Automatic using Opti-mole™ osmolality standards
Working temperature range Ambient 0°C to 200°C
Temperature range 0.0°C to 200.0°C
Temperature stability ±0.1°C at 40°C
Temperature stability ±0.15°C at 100°C
Temperature setting 3 push buttons
Temperature display 4 digit LED
Set point resolution 0.1°C
Set point to accuracy ±1°C
Max temperature variation between blocks 0.2°C at 40°C
Heat up time 30°C to 37°C 11 minutes
Heat up time 30°C to 56°C 15 minutes
Heat up time 30°C to max 25 minutes
Number of blocks 3
Overall size L x W x H (mm) 279 x 260 x 105
allowed speed: 10.000 min -1
Temperature range 0 to 99°C
Stability (DIN 58966) ± 0.1°C
Uniformity ± 0.1°C
Temperature setting/display digital/LED
Display resolution 0.1
Shaking speed range 20 to 200 rpm
40 to 360 strokes/min
Linear - stroke length 18, 28, 36 mm
Orbital radius 9mm
Shaking speed setting/display digital/LED
Display resolution 1
Tank dimensions l/w/d
505/300/200 mm
Shaking tray area
375/235 mm
Flask immersion min./max.
0/90 mm
Liquid depth, in the tank
40mm to 130mm
The Branson 3210 Ultrasonic Cleaner is a heated ultrasonic cleaner.
stainless steel oscillating tank with high-grade PZT high-performane ultrasonic system, ultrasound frequency 35 kHz
digital timer for 1, 2, 3, 4, 5, 10, 15, 30 min and continuous operation
heating power: 280 W
operating volume: 3,8 l
The Climate Impacts Research Centre (CIRC) is based at the
Department of Ecology and Environmental Sciences
All photography provided by CIRC Members and are copyrighted by the owners.
