Sanyo Incubator MIR 253
Quantity: 2
Specifications (see manual for details):
Effective capacity: 254 l
Quantity: 2
Effective capacity: 254 l
Leveling: semi-automatic
Calibration: internal, iso-CAL
Readability: 0.001, 0.002, 0.005 mg
Format: Gram, kilogram, carat, pound, ounce, troy ounce, H
Readability: 0.1 mg
Maximum capacity: 210 g
Taring range: 0...210 g
Repeatability (s): 0.1 mg
Sample Volume: 10 μL nominal (Larger samples or samples as small as 2 μL can be measured reliably with special procedures)
Measurement Range: Typically 0 to 3200 mmol/kg* @ 25 °C ambient
Measurement Time: 80 seconds
Resolution: 1 mmol/kg
Repeatability Standard deviation: ≤ 2 mmol/kg
Linearity: 2% of reading from 100 to 2000 mmol/kg
Readout: 10 X 6.8 cm LCD
Operating Temperature: 15° to 35 °C ambient Maximum relative humidity 80%(instrument should be at stable temperature before calibrating)
Calibration Automatic using Opti-mole™ osmolality standards
Working temperature range Ambient 0°C to 200°C
Temperature range 0.0°C to 200.0°C
Temperature stability ±0.1°C at 40°C
Temperature stability ±0.15°C at 100°C
Temperature setting 3 push buttons
Temperature display 4 digit LED
Set point resolution 0.1°C
Set point to accuracy ±1°C
Max temperature variation between blocks 0.2°C at 40°C
Heat up time 30°C to 37°C 11 minutes
Heat up time 30°C to 56°C 15 minutes
Heat up time 30°C to max 25 minutes
Number of blocks 3
Overall size L x W x H (mm) 279 x 260 x 105
Sample volume max.: 2 x 20 ml
Feed grain size max.: 8 mm
Final fineness down to: < 5 μm
normal grinding times: Ø 2 minutes
Wet grinding: all grinding jars
allowed speed: 10.000 min -1
Temperature range 0 to 99°C
Stability (DIN 58966) ± 0.1°C
Uniformity ± 0.1°C
Temperature setting/display digital/LED
Display resolution 0.1
Shaking speed range 20 to 200 rpm
40 to 360 strokes/min
Linear - stroke length 18, 28, 36 mm
Orbital radius 9mm
Shaking speed setting/display digital/LED
Display resolution 1
Tank dimensions l/w/d
505/300/200 mm
Shaking tray area
375/235 mm
Flask immersion min./max.
0/90 mm
Liquid depth, in the tank
40mm to 130mm
The Branson 3210 Ultrasonic Cleaner is a heated ultrasonic cleaner.
stainless steel oscillating tank with high-grade PZT high-performane ultrasonic system, ultrasound frequency 35 kHz
digital timer for 1, 2, 3, 4, 5, 10, 15, 30 min and continuous operation
heating power: 280 W
operating volume: 3,8 l
Weight: 10 kg
Max. speed (REVOLUTIONS): 14000
Timing device: Yes
Range, min: 15,hold
Increments, min: 1
Momentary button: Yes
Specifications (see manual for details):
Integrated pure and ultrapure water purification system
Tank capacity: 120 L
High-Precision balance, equipped with an internal calibration weight.
Weighing capacity: 620g
Readability: 0.001g
Weighing pan size: 115 (in diameter)
Laboratory Glassware washer with drying unit
Type: GG 02
Model: G 7883
Serial Number: 00 / 74309648
Disposables:
Detergent: Extran® AP17 is a nitrilotriacetic acid (NTA)-free, liquid alkaline universal cleaning agent
Neutralizer: Extran® AP 22, liquid acidic rinse with citric acid for gentle pre-rinsing and post-washing neutralisation
Weighing capacity: 220 g
Readability: 0.1 mg
Quantity: 8
See manual for specifications
Note: This instrument is owned by the owner of each specific lab.
The Climate Impacts Research Centre (CIRC) is based at the
Department of Ecology and Environmental Sciences
All photography provided by CIRC Members and are copyrighted by the owners.